Inspect/Adjust Weekly; Inspect/Adjust Monthly - Invacare Patriot Manuel De L'utilisateur Et D'entretien

Wheel bearings are clean and free of moisture.
Ensure all caster/wheel/fork/headtube fasteners are secure.
Wheel locks do not interfere with tires when rolling.
Wheel lock pivot point are free of wear and looseness.
Wheel locks are easy to engage.
Inspect tires/casters for flat spots and wear.
Check pneumatic tires for proper inflation (recommended tire pressure is listed on the
side wall of the tire).
DO NOT use WD-40®, 3-in-1 Oil®, or other penetrating lubricants on quick-release
axles. Otherwise, binding and/or damage to the wheelchair may occur.
Clean quick-release axles with a Teflon
Ensure axles are free from dirt, lint, etc.
Ensure roller bearings are free from dirt, lint, etc.
Adjust wheel locks as tires wear.
Clean and wax all parts.
Clean upholstery and armrests.

INSPECT/ADJUST WEEKLY

Wheelchair rolls straight (no excessive drag or pull to one side).
Quick-release axles lock properly.
Inspect for broken spokes.
Wheel/fork assembly has proper tension when caster is spun. Caster should come to
a gradual stop.
Inspect tires/casters for flat spots and wear.
Check pneumatic tires for proper inflation (recommended tire pressure is listed on the
side wall of the tire).

INSPECT/ADJUST MONTHLY

Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify
hardware that attaches strap to frame is secure and undamaged. Replace if necessary.
Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.
Wheel bearings are clean and free of moisture.
Wheel locks do not interfere with tires when rolling.
Wheel lock pivot point are free of wear and looseness.
Part No 1088909
SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING
WARNING
® lubricant.
25
Patriot™