Massage Heads Up-Down Adjustment; Massage Heads Width Adjustment; Massage Stroke Adjustment; Massage Intensity Adjustment - Panasonic EP1015 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Massage heads up-down adjustment

down
up

Massage heads width adjustment

width
narrow
wide

Massage stroke adjustment

stroke
24in.
4in.

Massage intensity adjustment

intensity
14
Use of the up or down adjustment button allows you to adjust the up and down
direction of the massage heads.
To move the massage heads up, press and hold the "up"
press the "down"
button. You must hold the button down until you reach the spot
you want.
Use of the width (narrow or wide) adjustment button allows you to select the width
between the massage heads (available only in the tapping, rolling, and tapping
rolling massage modes).
Press the "width" button to change the width.
Use of the stroke adjustment button allows you to select the focus area of the
massage strokes (available only in the rolling, kneading rolling, and tapping rolling
massage modes).
Press the "stroke" button to change the stroke.
NOTE:
• Switches between regional and full:
24in.: Approx. 23 5/8 in. (600 mm)
4in.: Approx. 4 3/4 in. (120 mm)
• When "4in." is selected, you can adjust the height of the massage heads to the
desired position with the up/down adjustment buttons.
Use of the intensity adjustment buttons allows you to adjust the intensity of the
massage during manual operation for kneading (upward/downward), tapping, rolling,
kneading rolling, and tapping rolling massage modes.
Press and hold the intensity adjustment button to choose the desired massage
intensity.
NOTE:
• When you adjust the massage intensity, the massage heads' position may
change.
• The massage heads stop automatically when they reach the maximum or
minimum intensity positions. When you release your finger from the button,
operation will resume.
(See page 17.)
button. To lower them,

Publicité

Table des Matières
loading

Table des Matières