Road Transport - Kongskilde SUC 300 T Instructions De Service

Road transport

Always follow the rules in force for
transport of agricultural machines
when driving with the suction
blower on public roads.
When transporting the suction
blower, the loading equipment must
always be in transport position.
The suction blower is designed
to be powered by a tractor. It
is therefore constructed to a
maximum transport speed of 40
km/h. By transport in a bumpy area
the speed must always be adjusted
after the conditions in order to avoid
overloading.
Be aware of the height of the
suction blower during transport
close to electrical cables and the
like.
26
Placing the Truck Loading Equip-
ment in Blowing Position.
Loosen swing brake (1).
Lift cyclone with crank (2).
The lock on the cyclone support is
automatically unlocked by turning
the crank.
Lift and swing down handle (4) -
turn cyclone to blowing position.
Secure cyclone with swing
brake (1)
Placing the Truck Loading Equip-
ment in Road Transport Position
Loosen swing brake (1).
Turn with handle (4) cyclone to rest
in saddle (3). Leave handle in verti-
cal position.
Lower cyclone with crank (2) - con-
tinue until cyclone support is locked
in saddle.
Secure cyclone with swing
brake (1).