Safety Signs - Kongskilde SUC 300 T Instructions De Service

Safety Signs

Avoid accidents by always following the safety instruc-
tions given in the user manual and on the safety signs
placed on the machine
Warning signs with symbols without text may be found
on the machine. The symbols are explained below.
• This is a safety alert sign and
means: Attention! Risk of
personal injury.
• Read the user manual carefully
and observe the warning texts
in the user manual and on the
machine.
• Rotating parts must only be
touched when they are at a
complete standstill.
• Always stop the suction blower
prior to repair and maintenance.
Brake the tractor, stop the motor
and remove the ignition key, so
that the suction blower cannot be
started by mistake during repair
or maintenance.
24
•
Safety clamp
Application
The suction blower is to be used for pneumatic con-
veying of grain.
The suction blower cannot be used for conveying gluti-
nous or pulverized materials.
The suction blower may only be operated and serviced
121 115 071
by responsible and properly instructed people.
121 115 072
xxxxxxxxxxxx
The pipe to be fitted directly to the suction blower
outlet must always be attached by means of the
special safety clamp supplied with the suction
blower (see also under "Installation").