Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1 . Maintenance
The internal mechanical and electronic functional elements do
not require any maintenance.
2 . Cleaning
• Only clean the torque wrench with built-in angle gauge
with a dry cloth
• Do not expose the tool to liquids and/or aggressive sub-
stances.
3 . Spare parts
• Any service or repair work must be carried out by qualified
personnel only To arrange this, please get in touch with
your HAZET partner.
1 . Storage
Only store the torque wrench with built-in
angle gauge in its packaging.
• Prevent the wrench from falling.
• Keep tool in a dry and dust-free place.
• Do not store the tool outdoors.
• Protect the wrench from unauthorised access.
• Storage temperature: -10 up to +40°C.
• Relative air humidity: max. 60%.
ATTENTION! Remove the batteries if the torque
wrench with built-in angle gauge is not being used for
long periods of time. Battery leakage can damage the
tool. Reprogram the date and time every time the device is
reused. See "Design and Function" in Section 7, "Operation"
1 . Disposal
• For disposal, clean the electronic torque wrench and disas-
semble it according to the regulations for work safety and
environmental protection.
• Components can be recycled. Dispose of electronic com-
ponents and all batteries in accordance with legal regula-
tions and environmental directives (e.g. at scrap material
collection points or recycling centres). Scrap any residual
metal.
• Electronic waste, electronic components,
lubrication and other auxiliary materials must
be treated as hazardous waste and may only
be disposed of by authorised specialists!
• Reducing environmental pollution and preserving the
environment are at the heart of our activities.
Maintenance and care
• Only the manufacturer's original spare parts may be used.
• Unsuitable or defective spare parts may cause damage,
• The use of unapproved spare parts will void all warranty,
• Batteries (rechargeable or otherwise) must be replaced
Storage
2 . Transport
• Only transport the torque wrench with built-in angle gauge
Disposal
2 . Hotline / contact:
This product has been developed and tested in accordance
with our high quality standards. Should you have any questions,
comments, suggestions for improvement or change requests, we
would like to express our thanks to all HAZET customers for your
feedback and will be glad to address your issues.
Your contacts for warranty, repair, adjustment and calibration
are your local HAZET partner and the HAZET International Sales
department: export@hazet.de
malfunction or total failure of the tool.
service and liability claims as well as all claims for compen-
sation against the manufacturer or its agents, distributors
and sales representatives.
simultaneously as required, in a timely fashion. Only use
the same models of batteries. Note the direction of inser-
tion.
in its case and ensure that it does not fall during transpor-
tation. Avoid any mechanical shock effects such as hard
impacts or falls. Failure to do so may result in damage to
the electronic components of the torque wrench with built-
in angle gauge.
33
Publicité
Table des Matières
