Picking Up New Messages - Sony SPP-A941 Mode D'emploi

Operating from an outside phone (continued)

Picking up new messages

1
Call your telephone number from a touch-tone phone.
2
When you hear the greeting, press (#) and enter your remote ID code
(security code).
You will hear a confirmation beep.
The number of new messages will be announced.
3
Press the keys in the "Table of control codes" below for the desired
operation command.
4
When you are finished, disconnect the line.
Notes
• Do not let two seconds elapse between each digit of the remote ID code (security code) and
the control code.
• If you did not turn on the answering machine, your phone answers automatically after 10
rings.
• If the message recording memory runs out, the answering machine turns off automatically.
"Memory full. Please enter your security code" is announced.
• If you enter wrong remote ID code (security code) three times, the line will disconnect.
• If no keys are pressed within 20 seconds, the line will disconnect.
Tips
• Press (*)(0) on the touch-tone keypad or (PLAY/STOP) on the base unit to disconnect the
line.
• Cut off the Remote Control Card and carry it with you to see how to operate from an outside
phone.
Table of control codes
To
Play back messages in MAILBOX 1
Play back messages in MAILBOX 2
Play back messages in MAILBOX 3
Repeat/skip backward
Get help
Stop operation
Skip forward
Record greeting
Check greeting
Record a memo
Erase individual messages
Turn answering machine on/off
US
34
Answering Machine Features
Key
Notes
(#)(1)
Plays back from the first new message.
(#)(2)
Plays back from the first new message.
(#)(3) Plays back from the first new message.
(#)(4)
Press during play back to repeat a message. To
skip backward, press within two seconds after
the current message starts.
(*)(5)
Press to access simple voice menu. Press again
to access advanced voice menu.
(#)(5)
Stops every function
(#)(6) Press during play back to skip forward.
(*)(7) "Now recording" is announced.
(#)(7) Review your greeting
(*)(8)
Select the mailbox by entering "1", "2" or "3".
(#)(9)
Press during play back
(#)(0)
Turns the system on/off. "Answer machine on"
or "Answer machine off" is announced.