Basics; Making Calls - Sony SPP-A941 Mode D'emploi

Basics

Making calls

TALK/BATT
LOW lamp
VOL
switch
(*TONE)
Additional tasks
To
Select a better channel
Adjust the handset
volume
Switch to tone dialing
temporarily
Switch to another call
("call waiting" service*)
*Contact your telephone company to subscribe to this service.
Notes
• Before dialing, make sure you can hear the dial tone, otherwise you cannnot
dail correctly.
• When the TALK/BATT LOW lamp lights up by pressing (TALK/FLASH), the
IN USE lamp on the base unit lights up simultaneously.
14 US
Basics
1
2
(CHANNEL)
3
4
(REDIAL/PAUSE)
Do this
Press (CHANNEL).
Set the VOL switch to H (high), M (middle) or L
(low).
Press (*TONE) while using the telephone after
you're connected. The line remains in tone dialing
until disconnected.
Press (TALK/FLASH) to access the flash function.
Press (TALK/FLASH) again to return to the first
caller.
Pick up the handset from the
base unit.
Press (TALK/FLASH).
The TALK/BATT LOW lamp
lights up, then you'll hear a dial
tone. If you hear beeps, move
closer to the base unit.
Dial the phone number.
When you're done talking, press
(OFF) or replace the handset on
the base unit.
The TALK/BATT LOW lamp
goes off.