Folding Mechanism; Folding Up The Bicycle Rack; Maintenance And Care; Notes Regarding Environmental Protection - EUFAB CROW PLUS Manuel De L'opérateur

Masquer les pouces Voir aussi pour CROW PLUS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5.6 FOLDING MECHANISM

If you wish to operate the folding mechanism, always hold the U-shaped bracket or the bicycles
with one hand to ensure that the rack is not able to fold out suddenly. (Risk of injury)
To open the car boot, you may fold the rack down, even if bicycles are mounted.
With one hand, push down on the unlocking lever of the folding mechanism (Figure 17), with the other hand,
hold the bicycles or the U-shaped bracket. After unlocking, fold the bicycle rack down carefully.
When folding up, make sure that the mechanism is free and nothing is trapped in it. Make sure that the folding
mechanism is fully engaged before driving off.

5.7 FOLDING UP THE BICYCLE RACK

First fold the wheel rails back onto the rack table. Push the locking mechanism of the rear lights (Position 1 in
Figure 18) outwards, and then swivel the light mount back (Position 2 in Figure 18). Push it firmly against the rack
table until it engages perceptibly. Proceed accordingly on the other side of the rack.
In order to store the bicycle rack as flatly as possible, you can also fold the U-shaped bracket down. To do this,
undo the two knob nuts until the U-shaped bracket comes out of the locking mechanism. Now you can fold the
U-shaped bracket down onto the rack table.

6. MAINTENANCE AND CARE

After use, store the bicycle rack in a clean and dry place. Wash any mud or other dirt off using water.
Keep the trailer coupling clean and free of grease
Keep the rack tow bar clean and free of grease.
Check the bicycle rack regularly for damages. Damaged or worn parts must be replaced immediately. Only original replacement parts may be used.
Check the bolts and nuts of the bicycle rack regularly and tighten when necessary.
Immediately treat any damage to paintwork with paint.
Regularly lubricate rotating and moving parts.

7. NOTES REGARDING ENVIRONMENTAL PROTECTION

Due to its lighting system, the bicycle carrier is an electrical device.
Do not dispose of electrical appliances in household waste! Discarded electrical and electronic equipment must be collected separately and
recycled in an environmentally sound manner.
Contact your municipal or city government on how to dispose of old electronic equipment.
The materials are recyclable. You are making an important contribution to protecting our environment through recycling, material recycling
or other forms of re-utilising old appliances!
Dispose of the bicycle rack in accordance with the laws and conditions in your country.

8. CONTACT INFORMATION

EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
14
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
Figure 17: Folding mechanism
Figure 18: Folding in the rear lights
info@eal-vertrieb.com
www.eal-vertrieb.com

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

11582

Table des Matières