Led Display On The Operating Unit - ATT Nussbaum SMART LIFT 2.30 Manuel D'exploitation

5.5

LED display on the operating unit

The raising and lowering of the lift is monitored by a
position measuring system. The individual functions
are displayed additionally on the operating unit vi-
sually with an LED display. In the following you will
find individual descriptions:
Operating unit on the control column
Figure 6
OA1 red LED "Up off" operator side active
K1 green LED Motor contactor operator side
active
UA1 red LED "Down off" operator side active
OA2 red LED "Up off" opposite side active
K2 green LED Motor contactor opposite side
active
UA2 red LED "Down off" opposite side active
Lift green LED Lift moves upwards
Lower green LED Lift moves downwards
Display in normal function
• Move upwards:
The following LED illuminates: Lift, K1, K2 and lower
illuminates.
• Move downwards:
The following LED illuminates: Lower, K1, K2 and
raise illuminates
• Upper end position reached (Up Off actuated):
The following LED illuminates: OAI, OA2, lift and
lower illuminate
• Upper end position reached (Down Off actuated):
The following LED illuminates: UAI, UA2, lower and
raise illuminate
100
OPI_SMART LIFT 2.30 SL-2.35 SL-2.40 SL_V3.1_DE-EN-FR-ES-IT