General Power Tool Safety Warnings; Technical Data - REMS Twist Notice D'utilisation

eng
Translation of the Original Instruction Manual
Fig. 1 – 11
1 Pipe size on individual expander
2 Clamping screw
3 Mark on individual expander
4 Clamping spindel
5 R = Right-hand (clockwise) rotation

General Power Tool Safety Warnings

WARNING
To reduce the risk of injury, the user must read and understand the instruction
manual.
Read all safety warnings and all instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term „power tool" in the warnings refers to your mains-operated (corded) power
tool or battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the pres-
ence of flammable liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distrac-
tions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools. Unmod-
ified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplug-
ging the power tool. Keep cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric
shock.
f) If operating a power tool in a damp location is unavoidable, use a residual
current device (RCD) protected supply. Use of an RCD reduces the risk of
electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating
a power tool. Do not use a power tool while you are tired or under the influ-
ence of drugs, alcohol or medication. A moment of inattention while operating
power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protec-
tion used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position before
connecting to power source and/or battery pack, picking up or carrying the
tool. Carrying power tools with your finger on the switch or energising power
tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A
wrench or a key left attached to a rotating part of the power tool may result in
personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables
better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust collec-
tion can reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from
the power tool before making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures reduce the risk of starting
the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power
tool. Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool's
6 Push switch
7 L = Left-hand (anticlockwise)
rotation
10 Holder
operation. If damaged, have the power tool repaired by qualified technical
personnel or an authorised REMS service shop before use. Many accidents
are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to
be performed. Use of the power tool for operations different from those intended
could result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power tool
is maintained.
Specific Safety Warnings
WARNING
● For safety reasons, use only the genuine REMS drive unit. The use of any other
unit could lead to operator injury and tool damage.
● Counter-torque! Absolutely essential is the use of the counter-holder!
Explanation of symbols
WARNING Danger with a medium degree of risk which could result in
death or severe injury (irreversible) if not heeded.
CAUTION
Danger with a low degree of risk which could result in minor
injury (reversible) if not heeded.
NOTICE
Material damage, no safety note! No danger of injury.
Read the operating manual before starting
Power tool complies with protection class I
Power tool complies with protection class II
Environmentally friendly disposal

1. Technical Data

Use for the intended purpose
WARNING
REMS Twist/Hurrican may only be used for its intended purpose of producing T-outlets
and cold expansion of hard and soft pipes for pipe installation without fittings.
All other uses are not for the intended purpose and are prohibited.
1.1. Capacity
Expanding: Copper pipes, hard, soft, 12 – 22 mm, ⅜ – ⅞", s ≤ 1 mm
Extracting: Copper pipes, hard, soft, 10 – 22 mm, ⅜ – ⅞", s ≤ 1.5 mm
1.2. Speed
Electronic control
1.3. Electrical data
230 V, 50 – 60 Hz, 620 W, 2.9 A; or 110 V, 50 – 60 Hz, 620 W, 5.8 A
1.4. Dimensions
Steel case
1.5. Weights
REMS Twist/Hurrican Combi Set 4
REMS Twist/Hurrican Combi Set 5
REMS Twist/Hurrican Combi Set in
REMS Twist Set 4
REMS Twist Set 5
REMS Twist Set in
REMS Hurrican Set 4
REMS Hurrican Set 5
REMS Hurrican Set in
Drive unit
Expander tool
1.6. Noise information
Emission at workplace
1.7. Vibrations
Weighted effective value of acceleration
The indicated weighted effective value of acceleration has been measured
against standard test procedures and can be used by way of comparison with
another device. The indicated weighted effective value of acceleration can also
be used as a preliminary evaluation of the exposure.
CAUTION
The indicated weighted effective value of acceleration can differ during opera-
tion from the indicated value, dependent on the manner in which the device is
used. Dependent upon the actual conditions of use (periodic duty) it may be
necessary to establish safety precautions for the protection of the operator.
eng
0 – 550 r.p.m.
510 × 290 × 120 mm (20" × 11¾" × 4¾")
10.5 kg (23.2 lbs)
10.7 kg (23.6 lbs)
10.7 kg (23.6 lbs)
9.7 kg (21.3 lbs)
10.6 kg (23.4 lbs)
10.6 kg (23.4 lbs)
7.9 kg (17.4 lbs)
8.1 kg (17.9 lbs)
8.1 kg (17.9 lbs)
2.0 kg (4.5 lbs)
0.8 kg (1.7 lbs)
80 dB(A).
2.5 m/s²