Putting The Appliance Into Operation; Setting Up/Mounting The Appliance; Power Supply; Switching On - exonda S32 Mode D'emploi

GB
32

Putting the appliance into operation

6. Putting the appliance into operation
6.1

Setting up/Mounting the appliance

Detailed information on setting up and mounting can be found in the mount-
ing instructions supplied with each of the accessories.
CAUTION:
Use only original accessory parts when mounting the appliance. Using parts
from other manufacturers may involve risks. The warranty granted by the man-
ufacturer does not extend to the use of third-party products.
6.2

Power supply

We recommend that the wiring in your salon is protected with a residual current
circuit breaker fitted by a qualified electrician.
1. Check that the mains voltage corresponds with the information given on
the type plate.
2. Connect the cables to the socket. The wall socket must continue to be easily
accessible after the device is plugged in.
6.3

Switching on

• The appliance is switched on using the main switch which is located on the
left-hand side of the control unit. "0" will appear in the time display.