exonda S32 Mode D'emploi page 27

Parts and controls
The mobile stand appliance consists of:
- Infrared heater, model S32/S33
- ST5 stand pipe for S32/S33 or ST3 stand pipe for S32/S33
- ST5 stand base or ST3 stand base
The appliance must only be mounted using the ST5 stand pipe for the S32/S33
and the ST5 stand base, or the ST3 stand pipe for the S32/S33 and the ST3 stand
base.
The wall-mounted appliance consists of:
- Infrared heater, model S32W/S33W
- Acrobat 2000/75 wall-mounted extension arm, model WA04/75
- or Acrobat 2000/95, model WA04/95
- Wall bracket, model WL04
The wall-mounted appliance may only be mounted on the wall arm Acrobat
2000 model WA04/75 or WA04/95. The wall arm may only be mounted on a wall
bracket model WL04 that has been installed as described in the currently valid
installation instructions.
Optionally available:
- Wall arm stop limiter, 140° / 180°
- Mating plate
- Special fasteners
GB
25