Your Safety Is Important To Us; Warnings; Proper Use; Foreseeable Misuse - exonda S32 Mode D'emploi

Your safety is important to us

4. Your safety is important to us
• Thoroughly read these operating instructions prior to initial commis-
sioning.
• Above all, observe the safety instructions!
• The device should only be used as described in these operating in-
structions.
• Keep these operating instructions for reference.
• If you pass the device on to someone else, please include these operat-
ing instructions.
4.1

Warnings

If necessary, the following warnings will be used in these operating instructions:
DANGER! High risk: failure to observe this warning may result in injury to life
and limb.
WARNING! Moderate risk: failure to observe this warning may result in injury or
serious material damage.
CAUTION: low risk: failure to observe this warning may result in minor injury or
material damage.
NOTE: circumstances and specifics that must be observed when handling the
device.
4.2

Proper use

• The device serves exclusively for heat treatment and drying of human head
hair, in order to positively support the reaction time and result during the
treatment of the hair with cosmetic hair products.
• The appliance must be positioned in such a manner that the client's head is
located exactly in the middle of the appliance (see "Temperature sensor/Cli-
ent position" on page 33).
• Use the main switch to switch off the appliance immediately. Disconnect
the mains plug. (Only applies to mobile stand model).
4.3

Foreseeable misuse

• Before treatment with the appliance, do not apply ointments designed to
stimulate the blood circulation or similar products, as the heat given off by
the appliance will increase the effect of such products.
• During a perm program the hair must not be covered by a cloth, cap, film or
aluminum foil.
• The appliance must not be covered by towels or similar items.
• Do not treat the face or other parts of the body.
• Do not treat animals.
• The appliance may not be used to dry objects or heat food.
4.4

Safety components

• If the customer leaves the treatment area of the appliance during a treat-
ment (except in the treatment programs <COLOR> with model S32, and
<HIGHLIGHT> with model S33), the temperature sensor will adjust the
heating level upwards and switch off the heating after approx.
2-3 minutes.
GB
27