Pioneer DVL-V888 Mode D'emploi page 61

Changing Various Settings
Item
Class
This function lets you prevent your children viewing unsuitable material.
You can use this handy function if the disc features recorded parental lock
coding. With parental lock discs, this function works by skipping violent or
other scenes you don't want your children to see. For details, read the
PARENTAL
disc's instructions. Once the secret number has been set, the restricted
LEVEL
viewing level remains the same until the number is reset.
Try not to forget the secret number. If you do, you must return to the initial
settings. (For detail, see the bottom of this page.)
This lets you select a desired language for menus on discs that have them
SOFT MENU
in multiple languages.
This lets you select and set the usual language for movies in the same way
AUDIO
as for subtitles. Even if you change the language during play, or change
(Basic language)
discs, the language changes to the one set.
This lets you select and set the usual language for subtitles. Even if you
SUBTITLE
change the subtitle language during play, or change discs, the subtitle
(Basic subtitle language)
language changes to the one set.
On
language beforehand. When the basic language and basic subtitle language
are not identical, if you switch "DISPLAY" OFF and "ASSIST" ON in the
subtitle menu, it's the same as switching Auto OFF . With Auto on, the
AUTO
original language and subtitle language are automatically selected. When
the language and subtitle language are the same, subtitles are not displayed.
Language Selection may not operate in this way with certain discs.
¶
Off Basic subtitle language and basic language are those selected.
The subtitle which is displayed by discs can be selected, when the subtitle is set to "OFF".
SUBT. OFF
W. AUDIO
(Subtitle Off)
S. SUBTITLE : The selected subtitle language will be selected.
ASPECT
When watching wide mode software, this lets you adjust aspect ratio to suit your TV.
This shortens the time required to change from A to the B side, or from the
QUICK TURN
B to the A side when playing an LD. If you use this function, display of
remaining and total time are not possible.
You can select the graphics display position and graphics channel with CD
Graphics
graphics discs.
Switching between audio output from this product's optical digital output
DIG.OUTPUT
jack or digital output (coaxial) PCM/∂ jack is possible. Dolby Digital (sound
(Digital output)
system used at cinemas etc.) and Linear PCM (the same digital signal as
CDs) are the two standards for DVDs.
96 kHz: With PCM audio discs that have a sampling frequency of 96 kHz,
this assures high sound quality. However, when in the KARAOKE mode or
AUX INPUT mode, the sampling frequency is compressed to 48 kHz during
play. With discs that have a sampling frequency of 48 kHz, play is performed
DOWN SAMP with sampling frequency unchanged at 48 kHz.
48 kHz: During play, this compresses sampling frequency of 96 kHz discs
(Down sampling)
to 48 kHz. 48 kHz discs are played as they are at a sampling frequency of
48 kHz.
¶ You can select the sampling frequency to match that of the audio signal
¶ Some 96kHz DVDs are copy protected. With this kind of disc, no signal is
To return to the initial settings if they have been changed since you purchased the player, perform the following procedures.
If power to the player is ON, switch it OFF. While power is OFF, press the
All memorized settings are erased.
Details
This sets basic language and basic subtitle language to the same
You can select a language (see page 49) and select a subtitle language
(see page 50) part way through a movie.
: The selected audio language will be selected.
recorded on a disc. Simultaneous switching between Analog output/Digital
output is performed to match your selected sampling frequency.
output from the digital output terminal.
Settings status
Initial settings
(factory settings )
Level 8
English
English
English
ON
S. SUBTITLE
Wide
OFF
See how to set the graphics settings on
pages 46 – 47.
PCM/Dolby Digital
Automatically selects between
Dolby Digital and linear PCM to
match the audio signal.
This is when using an amp with
a Dolby Digital (AC-3) decoder.
96kHz
button while pressing the
STOP
Changing Various Settings
Switchable
between 1–8
Selection possible
depend on the disc
Select one from 136
languages.
(See how to set the
language on the next page.)
Select one from 136
languages. (See how to
set the language on the
next page.)
OFF
W. AUDIO
Letterbox
Pan&Scan
ON
PCM
Dolby Digital and linear PCM
signals are output in line with
the linear PCM standard. This
is when using a regular amp
or Dolby Pro Logic amp.
48kHz
POWER
button.
STANDBY/ON
61