Changing Graphics Display Position - Pioneer DVL-V888 Mode D'emploi

Changing Picture, Sound Quality and Graphics Settings
Changing graphics settings
Video and audio information is recorded in different areas on a disc.
There's also a subcode area where information such as subtitles
and song lyrics can be recorded. Graphics refers to the reading of
the signals in this area, and their display.
You can set the graphics channel (between 0 and 15) to select the
desired information for display, and set the Scroll setting (from
Normal to Step 17) to select the on-screen position of graphics
indications.

Changing graphics display position

During play, press
GRAPHICS.
GRAPHICS
ON OFF
2
Select ON with the
GRAPHICS
ON OFF
3
Press .
ENTER
GRAPHICS
SCROLL
CHANNEL
Scroll flashes.
46

Changing graphics display position

MODE
and select
MELODY MODE CONDITION PROGRAM
GUIDE VOCAL
KEY CONTROL
VOCAL PARTNER
LASER DBC
buttons .
DISC SIDE
A / B
AUDIO ANGLE DISPLAY
SUBTITLE
LAST PLAYBACK
MEMORY CONTROL
MENU
TITLE RETURN
ENTER
PREV NEXT
REV PAUSE PLAY FWD
CHP/TIME STOP REPEAT REPEAT
AUDIO SUBTITLE ANGLE DISPLAY
LAST PLAYBACK
MEMORY CONTROL
MENU
TITLE RETURN
ENTER
PREV NEXT
REV PAUSE PLAY FWD
CHP/TIME STOP REPEAT REPEAT
A–B
4
Press .
ENTER
GRAPHICS
SCROLL NORMAL
5
Select display position with the
buttons.
GRAPHICS
SCROLL STEP1
¶ You can select from 18
positions between Normal and
Step 17.
¶ To return to the normal display
CLEAR
position, press .
Press ENTER.
Graphics are displayed in the
selected position.
Note
If graphics are not displayed even if you perform these operations,
try changing the channel (refer to page 47).
Tip
To return to the previous display, press
MEMORY
CONTROL
MENU
TITLE RETURN
ENTER
PREV NEXT
REV PAUSE PLAY FWD
LAST PLAYBACK
MEMORY
CONTROL
MENU
TITLE RETURN
ENTER
PREV NEXT
REV PAUSE PLAY FWD
CHP/TIME STOP REPEAT REPEAT
A–B
CLEAR
LAST PLAYBACK
MEMORY CONTROL
MENU
TITLE RETURN
ENTER
PREV NEXT
REV PAUSE PLAY FWD
CHP/TIME STOP REPEAT REPEAT
A B
RETURN
on the remote control.