Troubleshooting; Storage - SilverCrest SDB 1500 B2 Mode D'emploi

Troubleshooting

Programme
The appliance is not
working.
The appliance produces
no steam.
The pump makes unusu-
ally loud noises.
A whitish edge forms on
the floor when the appli-
ance stops briefly during
operation.
The rotary brush "B"
(see Fig. 1 on page 34)
makes loud noises when
it rotates.

Storage

■ Fold the handle by pressing the "Handle" release button
■ Pull the upper cable hook
cable around the two cable hooks
part of the already wound up cable using the cable clip.
■ Carry the appliance using the carrying handle
■ Store the appliance in a dry and dust-free location.
GB │ IE
■ 36
│
Possible causes
The plug is not connected.
The "Steam" button
not been pressed.
There is no water in the
water tank .
The filter is blocked.
No steam setting has been
selected.
There is no water in
the water tank
Lime has been deposited.
The rotary brush "B" is dirty.
The rotary brush "B" is not
inserted properly.
out a little and turn it back upwards. Wind the
Possible solutions
Connect the appliance to a
mains power socket.
has
Press the "Steam" button
Fill the water tank with water
Change the filter
Use the MODE button
select the desired steam
strength.
Fill the water tank with water
.
Wipe the lime scale away with
a damp cloth. If necessary, add
a little descaler onto the cloth.
Clean the rotary brush "B".
Check whether the rotary brush
"B" is fitted correctly and correct
the fitting if required.
/ . Fix the end of the cable to any
.
.
.
.
to
.
.
SDB 1500 B2