Safety Information; Risk Of Electrical Shock - SilverCrest SDB 1500 B2 Mode D'emploi

Safety information

RISK OF ELECTRICAL SHOCK!

Connect the appliance only to mains power sockets supply-
►
ing a mains power voltage of 220–240 V ~ , 50/60 Hz.
In the event of operating malfunctions, and before cleaning
►
the appliance, disconnect the plug from the mains power
socket.
Always pull on the plug to disconnect the appliance from the
►
mains; never pull on the power cable itself.
Do not kink or crush the power cable, and route the cable so
►
that it cannot be stepped on or tripped over.
To avoid risks, arrange for defective plugs and/or power
►
cables to be replaced at once by qualified technicians or
our Customer Service Department.
Ensure that the power cable does not become wet or damp
►
during use. Route the cable in such a way that it cannot be
crushed or damaged.
To prevent risks, stop using the appliance immediately if it is
►
damaged.
Disconnect the appliance from the mains power socket be-
►
fore filling it with water, changing accessories or cleaning it.
Use the appliance only in dry indoor areas, not
outdoors.
Never submerse the appliance in water or other liquids!
►
Never aim the steam jet directly at electrical appliances or
►
equipment which contains electrical components, such as
the interior of ovens.
SDB 1500 B2
GB │ IE
23 ■
│