Clearance To Combustibles - CASTLE Serenity Instructions D'utilisation

Clearances To Combustibles
NOTE: These are minimum clearances to combustible walls established by the ASTM testing lab. (SEE FIGURES 3, 4, 5, & 6.)
Figure 3: Straight Installation Through Wall
Figure 5: Straight Installation Interior Vertical Vents
NOTE: When interior vent is installed vertically, the clearance to the back wall is determined by the vent size used. Install
vent at clearance specified by the vent manufacturer. Take into consideration any upward turning elbows or tees.
Check for parts online at www.castlestoves.com or call 800-450-EDGE (3343) M-F 8-5
5"
7"
2"
7"
Operator's Manual
Serenity Pellet Stove
5"
Figure 4: Corner Installation Through The Wall Vents
Figure 6: Corner Installation Interior Vertical Vents
5"
5"
11