Bosch PTS 10 Notice Originale page 37

OBJ_BUCH-783-001.book Page 37 Thursday, July 3, 2008 12:02 PM
Operate the power tool only when the work
area to the workpiece is clear of any adjust-
ing tools, wood chips, etc. Small pieces of
wood or other objects that come in contact
with the rotating saw blade can strike the op-
erator with high speed.
Only saw one workpiece at a time. Work-
pieces placed on top or aside of each other
can cause the saw blade to jam or the work-
pieces to move against each other while saw-
ing.
Always use the parallel guide or the angle
guide. This improves the cutting accuracy
and reduces the possibility of saw blade
binding.
If the saw blade should jam or when inter-
rupting work, switch the machine off, hold
the workpiece in place and wait until the
saw blade has come to a complete stop.
Never attempt to remove the workpiece as
long as the saw blade is running, otherwise
kickback can occur. Determine and correct
the cause for the jamming of the saw blade.
Symbols
The following symbols can be important for the operation of your power tool. Please memorise the
symbols and their meanings. The correct interpretation of the symbols helps you operate the power
tool better and more secure.
Symbol
Bosch Power Tools
Do not use dull, cracked, bent or damaged
saw blades. Unsharpened or improperly set
saw blades produce narrow kerf causing ex-
cessive friction, blade binding and kickback.
Always use saw blades with correct size
and shape (diamond versus round) of arbor
holes. Saw blades that do not match the
mounting hardware of the saw will run ec-
centrically, causing loss of control.
Do not use high speed steel (HSS) saw
blades. Such saw blades can easily break.
Do not touch the saw blade after working
before it has cooled. The saw blade be-
comes very hot while working.
Never operate the machine without the in-
sert plate. Replace a defective insert plate.
Without flawless insert plates, injuries are
possible from the saw blade.
Meaning
Wear hearing protection. Exposure to noise can cause
hearing loss.
Wear a dust respirator.
Wear safety goggles.
English | 37
1 609 929 R65 | (7/3/08)