Wiring A Version With Inductive 2-Wire Switch - Burkert 1062 Manuel D'utilisation

Red light (valve closed
detection)
Orange light (volt-
age present)
1062
Fig. 10: Wiring of the contact when normally closed (NC) on a
mechanical contact version, valve closed detection
1) Use a power supply that matches the data shown on the name plate of the
1062
30
Fuse suitable for
the max. load
-
+
NC NO
+
-
Power supply
+ -
8 A max.
Load
english
8.2.2 Wiring a version with inductive
2-wire switch
1062
Load
1)
Fig. 11: Wiring the inductive 2-wire switch in "less common"
mode, open and/or closed valve detection
1062
Load
Fig. 12: Wiring the inductive 2-wire switch in "more common"
mode, open and/or closed valve detection
Type 1062
Installationandwiring
Reaction speed according
to the max. load
+ -
125 mA
+
10-30 VDC
-
+ - Power supply
100 mA max.
Reaction speed according
to the max. load
+ -
125 mA
+
10-30 VDC
-
+ -
Power supply
100 mA max.