Eliminating Faults; Technical Specifications - Festo DMES Série Notice D'utilisation

DMES−...
12

Eliminating faults

If the axial play of the slide is greater than as specified in Care and Maintenance":
Send the DMES−... to Festo for repairs.
S
If there are squeaking noises or vibrations:
Check whether the DMES−... has been fitted free of tension
S
(evenness of support surface: 0.2 mm).
Lubricate the DMES−... in accordance with the chapter Care & Maintenance".
S
Modify the positioning speed.
S
13

Technical specifications

Design
Permitted temperature range 0 ... +40 °C (ambient temperature)
Fitting position
Protection class
Evenness of support surface
Resistance to corrosion as
per FN 940070
CT mark
Speed
Feed constant
Repetition accuracy
Axial play
*)
Max. perm. axial play
Care and Maintenance"
*) See chapter
Festo DMES−... 0505NH English
DMES−25−...
Servo drive with rotating spindle
As desired
IP40 or IP42 dep. on fitting pos. (see Fitting mech. components")
0.2 mm
External parts: KBK 2
Spindle incl. drive pin: KBK 0
Not CT−conform: Plastic spindle nut contains PTFE.
Max. 50 mm/s
2.5 mm / rev.
±0,05 mm (as per DIN 230 T2)
0.1 mm (new)
Max. 0,62 mm (worn)
.
DMES−40−...
4 mm / rev.
0.1 mm (new)
Max. 1,0 mm (worn)
37