Festo DMES Série Notice D'utilisation page 38

DMES−...
Maximum forces and torques
Guideline values for max.
work load depending on fit
ting position
Max. feed force
Max. input torque
Permitted lateral forces on
the drive shaft (e. g. with
belt drive)
Condition for combined
loadings
Materials
38
DMES−25−...
GF horizontal: 43 kg
GF vertical: 30 kg
KF horizontal: 60 kg
KF vertical: 30 kg
See appendix, page 111 (1. Max. axial forces ...)
See appendix, page 112 (2. Max. input torques ...)
75 N
Variant DMES−... (without slide)
Fz = 2 N
Fy, Mx = 0 Nm
My, Mz = 0 Nm
Variant DMES−...−GF (with sliding guide)
Fy, Fz = 430 N
Mx = 5.4 Nm (GK) / 5 Nm (GV)
My, z = 14 Nm (GK) / 25 Nm (GV)
Variant DMES−...−KF (with roller bearing guide)
Fy, Fz = 3080 N
Mx = 45 Nm
My, z = 85 Nm (GK)/170 Nm (GV)
| My |
| Mx |
) )
Mx My
max max
Cylinder profile, end cover,
slide, piston, guide rail GF:
Slide spindle, ball bearing,
cover band, guide rail KF:
Spindle nut:
Internal stops:
DMES−40−...
GF horizontal: 90 kg
GF vertical: 45 kg
KF horizontal: 90 kg
KF vertical: 45 kg
250 N
Fz = 15 N
Fy, Mx = 0 Nm
My, Mz = 0 Nm
Fy, Fz = 1010 N
Mx = 23 Nm (GK) / 21 Nm (GV)
My, z = 34 Nm (GK) / 58 Nm (GV)
Fy, Fz = 7300 N
Mx = 170 Nm
My, z = 330 Nm (GK) / 660 Nm (GV)
| Fy |
| Mz | | Fz |
) )
Mz Fy Fz
max max max
Aluminium wrought alloy
Steel
POM, PTFE
PA
Festo DMES−... 0505NH English
v 1