Cleaning; Technical Specifications; Transportation And Storage Conditions - Invacare ScanBed 750 Manuel D'utilisation

14. Cleaning

TM
The SB750 cannot withstand cleaning in washing machines nor flushing with a water jet. Use ordinary
disinfectioning detergents. Dry the bed after cleaning. Never use acids, alkalines or solvents. Please make sure the
power plug is removed from the socket outlet.
The back rest and the leg/thigh sections can be lowered onto the mattress support, which facilitates cleaning and
access to the control unit.
Important details for cleaning hand control, control unit and motors IP 66: Always clean with water and
brush. Water may be pressurised, but never use high-pressure cleaning or steam cleaning directly on the electrical
parts.

15. Technical specifications

All measurements are stated in cm. All angles are stated
in degrees. All measurements and angles are stated
without tolerances. Invacare® reserves the right to change
the stated measurements and angles without warning.

Transportation and storage conditions:

Temperature between -10° and 50° C
Humidity between 10 and 80 % RH
Pressure between 700 and 1.100 hPa
W x L
A
85x200 200
90x200 200
85x183 183
90x183 183
105x200 200
120x200 200
-10 - 50°C
14 - 122°F
10 - 80%
24
B C D
213 85 95
213 90 101
196 85 95
196 90 101
213 105 116
213 120 131
700 -
1.100 hPa
E
60
60
43
43
60
60