Cleaning And Maintenance; Safety Advice; Cleaning - Bartscher 174.195 Mode D'emploi

6. Cleaning and maintenance

6.1 Safety advice

o Before beginning with repair or cleaning works make sure the device has been
disconnected from power socket (pull the power plug!!!) and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables
and the plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets. Therefore, you must
not use any kind of pressure water jet for cleaning the device!

6.2 Cleaning

o Clean the device every day or more frequently when required.
o Unplug the device before cleaning operation (remove the plug!) and check whether
the slice thickness adjustment (8) is set to "0".
o Move the carriage (7) towards the slice thickness adjustment (8) (fig. 8).
o The elements having contact with food products should be cleaned especially
thoroughly with use of neutral cleaning agent.
o Clean the device, following the instructions for the individual subassemblies below:
Carriage and pusher handle
o In order to clean it remove the carriage (7) with the
pusher handle (4). To do this, loosen the carriage
adjustment (6), rotating it counterclockwise, and
remove the carriage itself (7) (fig. 8).
CAUTION!
Model 174.195 has no carriage
adjustment. In order to remove the carriage
unscrew both bolts under the tray (5), using
appropriate flat wrench.
o Wash the carriage (7) with cover (13), pusher (4)
and carriage tray (5) using warm water, soft cloth
and a neutral cleaning agent. Rinse with clean
water to remove the cleaning agent residuals.
- 36 -
⑬
⑦
⑥
⑧
Fig. 8
④
⑤