Cleaning And Maintenance; Safety Advice; Cleaning; Safety Instructions For Maintenance - Bartscher IK 20 Mode D'emploi

6. Cleaning and maintenance

6.1 Safety advice

o Before beginning with repair or cleaning works make sure the device has been
disconnected from power supply and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and
the plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets.
Therefore, you must not use any kind of pressure water jet for cleaning the device!

6.2 Cleaning

o Clean the device after each use.
o Wipe the cooking surface, service panel and casing with a soft, damp cloth with a
mild, non-abrasive cleaner.
o Use only a soft cloth. Never use abrasive pads that could scratch the surface.
o Do not use any aggressive cleaning agents containing gasoline or solvents as well
as sharp, pointy objects to clean the device.
o After washing the device use a soft, dry cloth to dry and polish the surface.
o If the unit is to remain unused for a longer time, store it in a dry, clean place safe from
frost and sunlight, inaccessible to children. Do not place heavy objects on the unit.

6.3 Safety instructions for maintenance

o Inspect the power cable regularly for damage. Never use the device if the cable is
damaged. If the power cable is damaged, have an authorised service center or
qualified electrician replace it.
o In case of damage or malfunction, please contact your stockist or our customer
service centre. Pay attention to the troubleshooting tips in pt. 7.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.
- 30 -