Cleaning And Maintenance; Safety Advice; Cleaning - Bartscher MSI400 Mode D'emploi

6. Cleaning and maintenance

6.1 Safety advice

o Before beginning with repair or cleaning works make sure the device has been
disconnected from power supply and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and
the plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets.
Therefore, you must not use any kind of pressure water jet for cleaning the device!

6.2 Cleaning

o Clean the device regularly.
o Before cleaning, remove the device's plug from its socket and leave it to cool.
Fig. 14 Wash the mixing rods thoroughly under warm running water. As needed,
a mild cleaning agent can be used. Rinse them with clean water to
remove any leftover cleaning substances.
- 30 -