Safety Instructions For Maintenance - Bartscher MSI400 Mode D'emploi

Fig. 15 Pour a bit of warm water into the mug after every use in order to wet any
remaining milk. Water will prevent leftover milk and flavours from gathering
at the bottom of the mug. This makes cleaning easier, and avoids
substances from burning during the next heating process. Use a soft brush
or cloth for cleaning the mug. Rinse thoroughly with clean water.
Fig. 16 Never wash the device's base under running water. Wipe the base with a
soft, moist cloth.
Fig. 17 Never immerse the device's base in water or other liquids. If water gets
inside the device it will cause a risk of electric shock when used.
Fig. 18
When finished using the device, place the mixing rods and power
cord in the storage areas at the bottom of the device.
o Use only soft cloths, never use harsh cleaners that could damage the device's
surface.
o After cleaning, dry the device's surface and polish with a dry cloth.

6.3 Safety instructions for maintenance

o Inspect the power cable regularly for damage. Never use the device if the cable is
damaged. If the power cable is damaged, have an authorised service center or
qualified electrician replace it.
o In case of damage or malfunction, please contact your stockist or our customer
service centre.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.
- 31 -