Safety Instructions For Maintenance; Possible Malfunctions - Bartscher IW 35 PRO Mode D'emploi

6.3 Safety instructions for maintenance

o Inspect the power cable regularly for damage. Never use the device if the cable is
damaged. If the power cable is damaged, have an authorised service center or
qualified electrician replace it.
o In case of damage or malfunction, please contact your stockist or our customer
service centre. Pay attention to the troubleshooting tips in pt. 7.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.

7. Possible Malfunctions

Error
message
• Momentary low voltage
E01
• Momentary high voltage
E02
• The device becomes too
E03
• Parts are damaged (e.g.
• The overheating
E05
Cause
(<160 V).
(> 270 V).
hot (e.g. due to blocked
ventilation slots)
transistor).
protection turns on in the
power module (> 150 ° C).
The device turns off.
Solution
• Remove the device from the socket
(pull the plug!). After a few minutes,
reconnect the device to the socket.
• Remove the device from the socket
(pull the plug!). After a few minutes,
reconnect the device to the socket.
• Clear/unblock ventilation slots.
Leave the device for a few minutes
to cool. The device is ready for use
again. If the error message after
cooling the device still appears on
the display, contact the
salesperson.
• Contact the salesperson.
• Remove the cookware from the
cooking surface. Leave the device
for a few minutes to cool. The
device is ready for use again.
- 35 -