Safety Instructions For Maintenance - Bartscher 4 ICE Mode D'emploi

CAUTION!
All elements which had contact with cleaners should be rinsed thoroughly with
clean water, in order to remove all traces of the cleaner.
o After washing the removed parts, you should put them again in their places.
o Do not use steel wool for cleaning. Various elements could loosen as a result.
o Do not use combustible cleaning materials (eg. alcohol, etc.), because there exists an
increased risk of fire or explosion when using the unit the next time.
o The surface of the unit should be cleaned with a moist cloth. A gentle cleaner can be
used for stronger dirt.
o Do not use aggressive cleaning materials or spray cleaners.
o Only soft cloths should be used. Never use any type of sharp cleaners which could
scratch the surface.
o After cleaning, you should use a soft, dry cloth for drying and polishing the surface.
o If sediment builds up in the interior of the unit, it should be removed by using a solution
of water with vinegar.

6.3 Safety instructions for maintenance

o Check the mains connection cable for damage from time to time. Never operate the
device when the cable is damaged. A damaged cable must immediately be replaced
by customer service or a qualified electrician to avoid dangers.
o In case of damage or malfunction, please contact your stockist or our customer
service centre.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.
- 23 -