Bartscher IK 20 Mode D'emploi page 30

Setting time
After selecting the desired mode (power level or temperature), press the button
marked . The number „0" will appear on the digital display and the LED time
control light will come on.
Using or you may set the time of operation in 5-minute intervals (max. 180 min.).
The time is counted down, and after several seconds the digital display returns to previous
displays.
To check the remaining time, press
When time has run out, an audio signal will sound and the device will automatically shift
into sensory mode.
NOTE!
When in use, the time may be adjusted at any moment using
function that the device is equipped with allows for the set power or temperature
levels to remain unchanged.
Any change may be made at any moment. The device will function in accordance with
the most recently provided settings or information.
CAUTION!
Do not place empty cookware on the heating plate.
Heating an empty pot or pan will activate the overheating protection mechanism,
an audio signal will sound and the device will turn off.
The error code „E02" will be displayed.
If this happens, remove the cookware from the device and leave it for several
minutes to cool. The device will return to proper functioning.
•
Ensure that the cookware used will not scratch the surface of the heating plate,
although this should not negatively affect the device's functioning.
•
When cooking or heating is finished, remove the plug from its socket
(do not rely solely on the sensory function)!
and it will be shown on the digital display.
or . The memory
- 29 -