Programmed Massage 11 - Panasonic EP790 Manuel D'utilisation

PROGRAMMED MASSAGE
First read, and familiarize yourself with, the safety precautions.
<HOW TO PRESET THE MASSAGE HEAD POSITION>
1. Press the "start/reset" button with cover slide down fully.
2. Set the massage heads adjustment switch to position "7".
Then adjust the massage heads to your shoulders while moving the adjustment switch.
The massage heads operation lamp flashes while moving the massage heads.
3. You can adjust the massage heads position while massaging.
NOTE: When you find your favourite position, memorize the number which is printed near the switch.
<HOW TO SELECT THE PROGRAMMED MASSAGE COURSE>
1. If you wish to massage your whole back, press
2. If you wish to massage your neck and shoulders mainly, press
3. If you wish to massage your lower back, press
Massage will operate automatically for 15 minutes after pressing the button.
NOTE: Check to be sure the course indicator lamp is lit.
If you wish to change the massage course, press any button you want.
You may change the massage course at any time during operation without harm
Your new instructions will override any previous ones.
<whole back>
<GENTLE MODE FOR PEOPLE WHO FEEL MASSAGE IS TOO STRONG>
Press (gentle mode button) button.
Gentle mode indicator lamp is lit.
The entire massage changes to a less intense, more gentle massage.
(Course contents do not change)
Gentle mode can be selected even in the middle of a programmed massage course.
Pressing the gentle mode button again will cancel gentle mode.
After the automatic course has finished, the massage heads will automatically
move to the "restore" position and stop.
To perform massage again, press the "start/reset" button on the controller again.
.
.
<neck shoulder>
.
<lower back>
11