Stihl HSA 65 Notice D'emploi page 41

During Operation
The green light emitting diodes indicate
the state of charge by lighting up and
flashing.
80 - 100 %
60 - 80 %
40 - 60 %
20 - 40 %
0 - 20 %
If the light emitting diodes on the battery
flash or light up red – see "If the red light
emitting diodes light up / flash".
HSA 65, HSA 85
If the red light emitting diodes light
up / flash
1 light emitting diode Battery is too
1) 2)
lights up red: hot
4 light emitting diodes Battery faulty
flash red:
3 light emitting diodes Power tool is too
light up red: hot – allow it to
cool down.
3 light emitting diodes Power tool
flash red: faulty – have
checked by
servicing
dealer
1)
During charging process: Charging
process starts automatically after
the battery has cooled down /
warmed up.
2)
During operation: Power tool cuts
out – allow battery to cool down; it
may be necessary to take the
battery out of the power tool for this
purpose.
3)
Battery is faulty and must be
replaced.
4)
STIHL recommends a STIHL
servicing dealer.
1)
/cold
3)
4)
English
39