Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 57
English

Using the Unit

Cutting Season
Observe country-specific or municipal
rules and regulations for cutting hedges.
N
Do not use your power tool during
other people's rest periods.
Cutting Sequence
N
Use lopping shears or a chain saw
to cut out thick branches first.
N
Cut both sides of the hedge first,
then the top.
Recommendation: Only cut hedges that
are no more than chest height.
Disposal
N
Do not throw cuttings into the
garbage can – they can be
composted!
36
Working Technique
Verrical cut
Swing the cutting blade from the bottom
upwards in an arc – lower the nose of the
blade, move along the hedge and then
swing the blade up again in an arc.
Any working position above head height
is tiring. To minimize the risk of
accidents, work in such positions for
short periods only.
Horizontal cut
Hold the cutting blade at an angle of 0°
to 10° as you swing the hedge trimmer
horizontally, using both sides of the
blade.
Swing the cutting blade in an arc
towards the outside of the hedge so that
the cuttings are swept to the ground.
Repeat the procedure several times on
wide hedges.
HSA 65, HSA 85

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Hsa 85

Table des Matières