General Description; Scope Of Delivery/Accessories; Overview - Parkside PWD 20 A1 Instructions D'origine

for heavy commercial use. The warranty
is void in the case of commercial use. The
manufacturer is not liable for damage
caused by improper use or incorrect opera-
tion.

General Description

The illustration of the principal
functioning parts can be found
on the front and back foldout
pages.
Scope of delivery/
accessories
Unpack the appliance and check that eve-
rything is present.
Dispose of the packaging material prop-
erly.
The appliance is delivered with a motor
head (1) attached. To remove the motor
head and take out the accessories, open
the fastening clips (8).
Motor head
- Stainless steel dirt container
- 5 rollers with accessory holders
- Three-piece suction pipe
- Suction hose with handgrip section
- Foam filter
- Textile filter bag (already fitted)
- Paper filter bag
- Floor nozzle with rotatable insert
attachment: Brush and rubber lip (al-
ready fitted)
- Crevice nozzle
- Instruction manual

Overview

Housing
1 Motor head
2 Carrying handle
3 On/off switch
4 2 accessory holders on motor
head
5 Suction connector
6 Dirt container
7 5 feet with rollers and accessory
holder
8 2 fastening clips
9 Mains connection cable
10 Cable holder
11 Blowing connector
Accessories
12 Three-piece suction pipe
13 Suction hose
14 Handgrip
Filters
15 Foam filter for wet suction
16 Textile filter for dry suction (al-
ready fitted)
17 Paper filter bag to vacuum
coarse dirt
Nozzles
18 Floor nozzle
19 Rotatable insert attachment for
floor nozzle with brush and rub-
ber lip for vacuuming carpets
and smooth surfaces (already
fitted)
20 Crevice nozzle
21 Filter basket
22 Suction fittings
23 Sealing ring
24 Connector on the suction fitting
25 Holder for mains cable
GB IE
17