Practical Advice; Maintenance And Servicing; Maintenance And Cleaning - Bosch PSR Select Notice Originale

If the drill spindle is blocked, do not press the on/off switch for longer
than 15 seconds. The power tool may become damaged if you do this.
Battery charge-control indicator
The battery charge indicator (5) displays the state of charge of the battery
when the power tool is switched on.
LED
Green continuous light
Red continuous light
Temperature-dependent overload protection
In normal conditions of use, the power tool cannot be overloaded. If the
power tool is overloaded or the permitted battery temperature is exceeded,
the electronics of the power tool will switch off until the temperature returns
to within the optimum operating temperature range.

Practical advice

Only apply the power tool to the screw/nut when the tool is switched
u
off. Rotating tool inserts can slip off.

Maintenance and Servicing

Maintenance and Cleaning

Before any work on the tool (e.g. maintenance, tool change etc.) as
u
well as during transport and storage, set the rotational direction
switch to the middle position. There is risk of injury from unintentionally
pressing the on/off switch.
To ensure safe and efficient operation, always keep the power tool
u
and the ventilation slots clean.
If the battery is no longer working, please contact an authorised after-sales
service agent for Bosch power tools.
In order to avoid safety hazards, if the power supply cord needs to be re-
placed, this must be done by Bosch or by an after-sales service centre that
is authorised to repair Bosch power tools.
Bosch Power Tools
English | 35
Capacity
≥ 30%
< 30%
1 609 92A 4M5 | (24.10.2018)