Placing A Call; Receiving A Call - Kenwood TK-760G Série Mode D'emploi

PLACING A CALL

1 Make sure no parties are currently transmitting on your selected channel.
2 Press the PTT switch, then speak into the microphone in your normal
speaking voice.
• For best sound quality at the receiving station, hold the microphone approximately
1.5 inches (3 ~ 4 cm) from your mouth.
3 Release the PTT switch to receive.

RECEIVING A CALL

Your dealer may have programmed QT or DQT signalling on your transceiver. If
your selected channel is programmed with one of these features, you will hear
calls only when another party in your system makes a call. All other calls will not
be heard.
If your selected channel is not set up with QT or DQT, you will hear calls made
by any party (not just those in your system).
10