Operating Basics; Switching Power On/Off; Adjusting The Volume; Selecting A Group Or Channel - Kenwood TK-760G Série Mode D'emploi

SWITCHING POWER ON/OFF

Press the IO switch to switch the transceiver ON (or OFF).
TK-760G/ TK-860G only: If the Radio Password function is programmed,
"PASSWORD" will appear on the display when the power is turned ON. To
unlock the transceiver, enter the password, then press the SCN key. If you enter
the wrong password, an error tone sounds and the transceiver remains locked.
The password can contain a maximum of 6 digits.

ADJUSTING THE VOLUME

Press the keys programmed as Volume Up and Volume Down to adjust the
volume. Volume Up increases the volume and Volume Down decreases it.
• You may need to adjust the volume more precisely while communicating with another
party.
Note: If your dealer programmed Monitor A or Monitor B onto a PF key, you can press that key to hear
background noise while adjusting the volume level (refer to "MONITOR" on page 19).

SELECTING A GROUP OR CHANNEL

Select the desired group or channel using the keys programmed as Group Up/
Down or Channel Up/Down.
• If a group or channel has not been programmed, it cannot be used.
Note:
Group Up/Down cannot be used on the TK-762G/ TK-862G transceivers.
TK-760G/ TK-860G features 128-channel capacity. In order to manage 128 channels easily, one or
more programmed channels can be bundled together as a group.
Your dealer may have programmed both Group Up/Down and Channel Up/Down keys. In this
case, select the desired group and channel number. Please consult your dealer for details.

OPERATING BASICS

9