Event Log - Abus Terxon PSTN Instructions D'installation

10.9 Event log

When an alarm call is transmitted successfully, the Terxon PSTN dialer
saves the last message transmission in the event log.
1. Enter your programming code (default: 1234). The following
message is shown in the display:
Press . The display shows the following:
Press to display the last event. In this example, message A has
been transmitted to telephone number 3 and confirmed.
IMPORTANT
BLANK in the display means that no events are available. The display
"A>----" indicates that the transmitted message A was not confirmed by
any recipients.
Press to exit the event log.
Press to end data entry.
READY
VIEWLOG-
A> --3-
57