Code Length - Abus Terxon PSTN Instructions D'installation

1. Enter your programming code (default: 1234). The following
message is shown in the display:
Press . The display shows the following:
Press . The display now shows:
Enter your personal programming code, then confirm with
Press to end data entry.

10.5 Code length

The default programming code has four digits. This function can be
used to change the code length to six digits.
IMPORTANT
If the code length is changed from four to six digits, then "00" is added
at the end of your existing programming code.
1. Enter your programming code (default: 1234). The following
message is shown in the display:
Press . The display shows the following:
Press . The display now shows:
Change the code length by pressing
READY
NEWCODE-
- - - -
READY
C,TYPE-
4, CODE
.
6, CODE
53
.