Putting Into Operation; Factory Settings Reset; Software Reset - Abus Terxon PSTN Instructions D'installation

9.

Putting into operation

9.1

Factory settings reset

In order to ensure that all existing settings are deleted, a factory
settings reset is recommended after a new installation. You can
choose between a software or hardware reset.
9.1.1

Software reset

1. Press and hold the
device. The following display message is shown.
Press . The display now shows:
Press . The display now shows:
Enter your programming code (default: 1234). You will see the
following message:
GJ Start the programming of the device.
key. Connect the power supply to the
ERASE ?
LANG ?
PLEASE
RECORD
READY
45