Delete; Programming Code - Abus Terxon PSTN Instructions D'installation

The test function (see 10.11.1) can be used for testing and playing the
recorded messages.
Press to end data entry.

10.3 Delete

All previously programmed messages and telephone numbers can be
deleted using this function. A complete factory settings reset is not
made, meaning other settings are kept.
IMPORTANT
If you only wish to delete individual telephone numbers or messages,
then overwrite them or delete them using the previous menu functions
1 and 2.
1. Enter your programming code (default: 1234). The following
message is shown in the display:
Press . The display alternates between the following:
Press to display MESSAGES. NUMBERS can be accessed by
pressing the
After selection has been made, press
programmed data.
Press to end data entry.

10.4 Programming code

We recommend changing the programming code for security reasons.
The programming code is used to access the programming menu, and
can also be used to abort an alarm call (see section 9.8).
key.
READY
ERASE -
MSG/NUM
to delete all previously
52