Various Operations During Playback; Forward/Reverse Scanning; Skipping Content - Pioneer HD-V9000 Mode D'emploi

05
Note
• Even without opening the Navigator screen, files can
be played by pressing the  PLAY button. Playback
starts from the first file in alphabetical order.
• If the picture or sound is not output properly, see
Troubleshooting (page 77).
• Some time may be required until the picture is
displayed if there are many files. We recommend
deleting any unnecessary files beforehand.
Various operations
during playback
Caution
• Time map tables are required to use such functions
as playing in reverse direction and searching. A time
map table consists of information on frames, times,
etc., extracted from the video file. Time map tables are
created with the application (HD PILOT). For details
on HD PILOT, see the Pioneer website.
• Store the time map tables in the SD memory card's
video folder along with the video files.
• When skipping while in the pause, still picture play or
slow play mode, the operation may differ, depending
on whether or not there is a time map table.
• On this unit, images and sound are played in units of
files. Even when continuous play is set for playlists,
the picture/sound will be interrupted when the file
switches.
40
En
STANDBY/ON
SEARCH REPEAT MEMORY RECALL
OUTPUT
RESOLUTION
+ +
- -
DISPLAY
FRM
/TIME
NAVI- PLAY
GATOR MODE
SETUP RETURN
• This unit's playback functions are shown on the table
below. Whether or not the functions operate depends
on whether or not there is a time map table.
Playback
functions
Play
Pause
Still
Step Fwd
Step Rev
Slow Fwd
Slow Rev
Scan Fwd
Scan Rev
Frame Search
Time Search
1. More time may be required until playback starts if there is
no time map table.
2. : Forward scanning is possible, but at a fixed speed.
With a time map table, the speed can be switched in three
steps.

Forward/reverse scanning

During playback, press the  REV SCAN or
1
 FWD SCAN button.
• The speed switches each time the button is pressed
(the speed is indicated on the display). The playing
speed changes as follows:
SCAN1  SCAN2  SCAN3  SCAN1  ...
• To perform this operation using the buttons on
the main unit's front panel, press and hold in the
/ or / button. The playing speed is set
to SCAN1.
 To resume normal playback
Press the  button on the remote control.
• When performing this operation using the buttons on
the main unit's front panel, release the / or
/ button.

Skipping content

During playback, press the  PREV or  NEXT
1
button.
• When the  NEXT button is pressed, playback
skips forward to the beginning of the next file.
• When the  PREV button is pressed, playback
skips backward to the beginning of the currently
playing file. When pressed twice in a row, playback
skips back to the beginning of the previous file.
• The files are sorted in alphabetical order on the
Navigator screen and played.
Time Map Table
No Yes
1
2