Video Output Formats; About Sd Memory Cards - Pioneer HD-V9000 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Video output formats

01
Note
• Settings in bold indicate the factory defaults.
Resolution
720 x 480
720 x 576
1280 x 720
1920 x 1080
1. Only the resolution can be set at Scaler Setting (page 46). The frame rate is determined by the playback format.
2. TV SYSTEM switch setting (page 26)
3. When different from the video content's frame rate, the video signals are not properly output.
4. The noise reduction function cannot be used with 1080p outputs (page 45).
• When using the external sync function, set the external synchronizing signal, playback file and Scaler Setting
(page 46) settings to the same resolution.

About SD memory cards

SD specifications
1
Supported cards
1
File formats
1
Speed class
1. CPRM is not supported. Operation, transfer speed and reliability are not guaranteed on this unit.
2. • Video files on SD memory cards formatted in NTFS can be played, but their reading time will be slow, and for this reason the transfer rate
is not guaranteed.
• Formatting in NTFS is not possible on this unit.
• The NTFS format is not a format recommended by SD standards for SD memory cards. Note that for some SD memory cards, formatting
the card in NTFS may compromise reliability.
• SDHC memory cards can be used with devices supporting SDHC memory cards. They cannot be used with devices
that only support SD memory cards. Also, Pioneer does not guarantee that all SD memory cards will operate on
this unit.
• When using SD memory cards of 4 GB or greater, use SD memory cards on which the SDHC logo is indicated.
• SD memory cards are shipped from the manufacturer in the standard FAT16 or FAT32 format. If a non-formatted
SD memory card is loaded, SD CARD FORMAT ERROR is displayed and the card cannot be used.
• It may not be possible to use cards formatted on a computer, digital camera, etc.
• It is also possible to format SD memory cards on this unit (page 51).
• On SD memory cards formatted in FAT32, the maximum size per file is 4 GB. To play a file larger than 4 GB, divide
the file using the application (HD PILOT).
• SDHC Logo is a trademark of SD-3C, LLC.
20
En
Scaler Setting settings
1
Frame rate
COMPONENT
VIDEO OUT
3
59.94i
3
59.94p
3
50i
3
50p
59.94p
50p
59.94i
50i
4
59.94p
4
50p
Conforming to SD Specifications Part 2 File System Specification Version 2.00
SD memory cards: 8 MB/16 MB/64 MB/128 MB/256 MB/512 MB/1 GB/2 GB
SDHC memory cards: 4 GB/8 GB/16 GB/32 GB
2
FAT16/FAT32, NTFS
Class 2/4/6/10 for SDHC
Output Terminal
HDMI OUT
2
NTSC
720 x 480/59.94i
VIDEO OUT
2
PAL
720 x 576/50i

Publicité

Chapitres

Table des Matières
loading

Table des Matières