Playlists; Creating Playlists Using The Simple Create; Changing The Order Of Registered Files - Pioneer HD-V9000 Mode D'emploi

Chapter 7
07

Playlists

Playlists can also be created and edited using the HD
PILOT computer application. For details on HD PILOT, see
the Pioneer website.
Time map table files of the video files you want to play
must be created in advance using HD PILOT in order to
create playlists.
Creating playlists
using the Simple
Create
Use this function to easily create playlists for playing
video files continuously.
STANDBY/ON
SEARCH
GATOR
SETUP
1 Display the Setup menu.
Press the Setup button.
Select Playlist  Simple Create  Select.
2
Use /// to select, then press ENTER.
54
En
REPEAT MEMORY RECALL
OUTPUT
RESOLUTION
+
-
DISPLAY
FRM
/TIME
NAVI- PLAY
MODE
RETURN
3 Select the files you want to play.
Use / to select, then press ENTER. The specified file
is registered in the playlist. Repeat this procedure to
register more files.
Playlist
Simple Create Source 01/02
.
000m00s
********** ***
.
000m00s
********** ***
.
********** *** 000m00s
.
000m00s
********** ***
.
000m00s
********** ***
.
********** *** 000m00s
.
000m00s
********** ***
.
000m00s
********** ***
.
000m00s
********** ***
Move Select ENTER
4 Finish creating the playlist.
When SETUP or RETURN is pressed, a confirmation
screen appears. Use / to select OK, then press
ENTER. The playlist settings are saved.
• When SETUP is pressed, the Setup screen turns off.
• When RETURN is pressed, the unit returns to step 2.
• When CANCEL is selected, the unit returns to step 2
without saving the playlist settings.
• When RETURN is selected, the unit returns to step 3.
Note
• Up to 20 playlists can be registered.
• Up to 12 video files can be registered per playlist.
• Video files for which there is no time map table file
cannot be registered.
Changing the order of
registered files
1 Display the Setup menu.
Press SETUP.
Select Playlist  Simple Create  Select.
2
Use /// to select, then press ENTER.
3 Select the file you want to move.
Use  to move the cursor to the playlist. Use / to
select the file, then press ENTER. The menu appears.
4 Select Change Position.
Use / to select, then press ENTER. A bar appears.
Playlist
List 01 02/02
01 .
********** ***
02
Return RETURN Exit SETUP