Cleaning The Suction Opening; Cleaning The Brushes - Medion Micromaxx MD 15328 Mode D'emploi

Robot aspirateur
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

 Empty the dust container over a dustbin.
 Rinse out the dust container with water. Rinsing is not necessary every time.
Never put the dust container in the dishwasher!
 Clean the filter regularly with a soft toothbrush.
 As soon as the dust container is dry, replace the filter.
 After successful cleaning, replace the dust container and close the vacuum
cleaner cover.
CAUTION!
Before using the device again, please ensure that the dust container fil-
ter has been inserted correctly. If this is not the case, it can lead to the
vacuum cleaner being damaged.

8.2. Cleaning the suction opening

After a while, dirt and dust can collect around the suction opening and can reduce
the suction power. To avoid this, the suction opening should be cleaned regularly.
 Switch off the device.
 Remove dirt and dust from around and inside the suction opening.

8.3. Cleaning the brushes

We recommend cleaning the brushes regularly. Carry out the following steps:
 Switch off the device and lay it on its back on a flat surface.
 Hold the brushes firmly and pull them directly upwards and out of the device.
 Remove dirt and hair that has collected on the brushes.
 After cleaning, replace the brushes.
 After a certain time, the brushes should be replaced to ensure efficient cleaning
performance. Please contact our Service Center for replacement accessories.
NOTE
If the bristles become bent, immerse the brushes in hot water until they
resume their original form.
DE
FR
NL
EN
61 / 66

Publicité

Table des Matières
loading

Table des Matières