Operation; Stopping The Leaf Vacuum (Fig. J); Blower Mode (Fig. K); Vacuum Mode (Fig. L) - Medion MD 16907 Mode D'emploi

9. Operation

 Connect the appliance to a safety socket using the extension cable (see also sec-
tion "7.4. Connecting an extension cable").
 Use the selection lever (3) on the side of the appliance to choose either vacuum
or blower mode and press the On/Off switch (1) to switch the appliance on.
 Turn the speed control (10) from "1" to "6" if you require more power (Fig. J).

9.1. Stopping the leaf vacuum (Fig. J)

 In order to stop the appliance, you simply need to release the On/Off switch (1).

9.2. Blower mode (Fig. K)

 Inspect the working area before starting work. Remove all objects or waste that
could be thrown around or crushed by the leaf vacuum or could become entan-
gled in it.
 Select blower mode using the selection lever (3) on the side of the appliance
and switch the appliance on. Support the leaf vacuum on its wheels and move it
forwards. Direct the nozzle onto the dirt that needs removing.
 Alternatively, you can hold the nozzle directly above the ground and swing the
appliance from side to side while also moving forwards and directing the nozzle
at the dirt that needs removing.
 Blow the waste together into a heap and then use vacuum mode to vacuum it up.

9.3. Vacuum mode (Fig. L)

 Inspect the working area before starting work. Remove all objects or waste that
could be thrown around or crushed by the leaf vacuum or could become entan-
gled in it.
 Select vacuum mode using the selection lever (3) on the side of the appliance
and switch the appliance on. Support the leaf vacuum on its wheels and move it
forwards. Direct the nozzle onto the dirt that needs vacuuming.
 Alternatively, you can hold the leaf vacuum directly above the ground and swing
the appliance from side to side while also moving forwards and directing the
nozzle at the dirt that needs vacuuming. Do not press the nozzle into the dirt.
This will cause the suction tube to become blocked and will reduce the perfor-
mance of the appliance.
 Organic materials such as leaves contain a large amount of water and can stick
to the inside of the suction tube as a result. Allow organic waste to firstly dry for
a few days so that it does not stick to the tube.

10. Cleaning the appliance

WARNING!
Live components. There is a risk of electrical shock.
114 of 122