Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN
5. As soon as the water has been heated to the selected temperature, you will hear 3 x 2
short beeps and the device automatically switches to stand-by mode. The control
lamp in the On / Off button goes out, the control lamp in the chosen temperature
button goes out after around 1 minute if no other function has been selected.
6. Pull the mains plug out of the plug socket and allow the device to cool down before it
is cleaned and / or stored away (see the "Cleaning and Care" chapter).

Keeping Warm

If the water in the kettle (3) is to be kept at a certain temperature for a prolonged period,
the keep-warm function can be switched on. This is particularly advisable if tea is being
prepared in the kettle.
The device switches off the heating element once the water has reached the set
temperature and switches it back on again as soon as the temperature of the water
drops.
1. Press the keep-warm button (12). The control lamp in the button lights up.
2. Heat the water to the temperature you want (see the "Preparation" chapter | "Boiling
Water" or "Preparation" | "Heating Water").
will hear two short beeps. The control lamps (On / Off button (11), keep-warm button,
selected temperature button) continue to be lit up constantly. The water is reheated as
soon as it starts to cool down. As soon as the thermostat switches the heating back
on, the control lamp for the selected temperature button lights up again.
3. The kettle can be removed from the base station (4) and placed back on it at any time.
The keep-warm function remains switched on.
4. If the keep-warm function is to be switched off, press the On / Off button. A long beep
is heard and all three control lamps go out.
5. Pull the mains plug out of the plug socket and allow the device to cool down before it
is cleaned and / or stored away (see the "Cleaning and Care" chapter).
The keep-warm function switches off automatically after two hours.
09100_DE-EN-FR-NL_A5_V1.indb 30
09100_DE-EN-FR-NL_A5_V1.indb 30
After the end of the heating process, you
30
04.10.2017 11:49:57
04.10.2017 11:49:57

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

09100

Table des Matières