Cleaning; Replacement Parts - Beurer MP 62 Mode D'emploi

Always check results regularly during treatment. As soon as the application
becomes unpleasant, stop the treatment.

6.Cleaning

• Before cleaning, always unplug power adapter from the electrical outlet.
• Clean the device with a slightly moistened cloth. You can also moisten
the cloth with a mild detergent.
• If necessary, attachments can be cleaned with a cloth or brush moistened
with isopropyl alcohol. Dry them carefully afterwards.
• Keep water out of the device. If water does contact the device, let it dry
thoroughly before using.
• Do not use harsh chemicals or abrasive cleaners on the device.
• Never immerse the device or power adapter in water or other liquids.

7. Replacement parts

A complete replacement set (UPC 853879007409) is available on
www.amazon.com. The following parts are included:
Sapphire cone
Felt cone
Fine sapphire wheel
Cylindrical Grinder
Pointed Grinder
Round sapphire Grinder
Needle shaped Grinder
Long sapphire cone
Coarse sapphire wheel
Holder for sandpaper attachment
10 disposable attachments
L – Dust Shield
Controls nail dust. When filing, always work from the
outside of the nail towards the tip.
8