Christopeit Sport Como Notice De Montage Et D'utilisation page 21

Step 5:
Attach the computer (38) at computer support (48).
1. Push the connecting cable (49) and sensor connection cable
(37) through the computer holder (44) into front position.
2. Put the computer holder (44) with two plastic washers (42+43)
onto the computer support (48) and attach it with carriage bolt
M8x75 (39), washer (5) and nut (31).
3. Remove the 4 screws (51) from backside of computer (38).
Lead the computer (38) to computer holder (44) and push the
plug of the connecting cable (49) and sensor connection cable
(37) into the associated socket of the computer (38).
4. Storage the cable connection into the backside of computer
(38) and put the computer (38) on the computer holder (44) and
attach it with the screws (51).
Note: If the set position of computer change automatically du-
ring exercising, then tighten the nut (31) a little bit at the com-
puter support (44) for a fixed incline position, as well as the nut
(31) behind the plug (53) for computer height position.
Step 7:
Checks
1. Check the correct installation and function of all screwed and
plug connections. Installation is thereby complete.
2. When everything is in order, familiarize yourself with the
machine at a low resistance setting and make your individual
adjustments.
Note:
Please keep the tool set and the instructions in a safe place as
these may be required for repairs or spare parts orders becoming
necessary later.
Fold up and storage the rowing machine.
1. To storage the rowing machine, screw out the hand grip screw
(32) totally and turn/pull the quick release (14) to unlock the seat
rail (6). Fold up the seat rail (6) into vertically position and secure
this position with turn/pull the quick release (14) at bottom side
of main frame (1). The hand grip screw (32) and washer (13) you
can storage into the threat holder at bottom area of seat rail (6).
Step 6:
Attach the power.
1. Please insert the plug of adaptor (47) to the power plug (82) at
end of chain guard.
2. Please insert the plug of adaptor (47) to the jack of wall power
(230V~50Hz).
21