Christopeit Sport Como Notice De Montage Et D'utilisation page 20

Step 3:
Attach the seat sled (27) with seat (25) at seat rail (6).
1. Screw out the limit stopper (15) from seat rail (6) and push the
seat sled (27) with preassembled seat (25) onto the seat rail (6)
in the right way as showed in figure Step 3.
2. Fix the limit stoppers (15) at appropriate position of seat rail (6)
by using axle for limited stopper (16), washer (17) and screw
(18).
Step 4:
Attach the rear foot (24) and foot pedals (34).
1. Put the rear foot (24) into the holder at seat rail (6) and screw
it tightly by using screw M10x110 (22), screw M8x45 (23),
washers (5) and self locking nut (10).
2. Screw into below threats at main frame the screws M12x170
(33). Then attach the foot pedals (34) at main frame (1) into ap-
propriate position in upper threats with screws M12x170 (33).
(For safe exercise condition of the rowing machine, the star grip
screw No. 32 must be firmly tightened, before user take exer-
cise position. The height-adjustable foot 20 under the seat rail
must be adjusted in such a way, that it does not touches the
ground, when it's folded out. During fold up, the height-adjusta-
ble foot touches the ground and serves as a standfoot.)
20